AI‑powered X‑ray inspection that finds hidden defects in every components.
Inline Inspection
%
Every part. Not a sample.
Component Length up to
m
Enclosure sized to your parts.
THE INSPECTION CHALLENGE
Surface checks and sampling can’t see inside a part. Voids, cracks and weld flaws stay hidden until final assembly or the field, where they become scrap, returns and recalls.
Key Aspect
Conventional Inspection
Destructive Testing
Aetherscan Radiqon
Inspection Method
Manual
Manual
Auto
Imaging Technology
Static Image-Based Radiography
Not Applicable to Non-Destructive Imaging
Video-Based Fluoroscopy and Image-Based Radiography
How Much you Check
Sample
Sample
100% of Parts
Part Condition
Fully Intact
Cut or Sacrificed
Fully Intact
Results
Film Development and Manual Review
Manual Review
Instant Digital Result with AI Detection
Bad Parts
Found Late, Sorted by Hand
Found Late, Sorted by Hand
Auto-Detected and Rejected
Cost Per Part
Rises with Manual Effort
Rises with Manual Effort
Lower at High Volumes
RADIQONᵀᴹ is AetherScan’s AI-powered X-ray defect detection system. It uses real-time radiography with up to 450 kV of X-ray power to see inside parts up to 3 m long without cutting or damaging them. Optivity® AI software finds defects, measures them and rejects non-conforming parts automatically, giving quality teams, production engineers and NDT professionals instant results with no film.
Aluminium castings and die castings to welds, PCB assemblies, food and tyres, RADIQONᵀᴹ helps manufacturers catch hidden defects early and make faster quality decisions. Designed for industrial X-ray inspection, it is configured to customize your component size, material, geometry, inspection volume and production workflow.
AetherScan is the company behind RADIQONᵀᴹ, built to give manufacturers one dependable platform for seeing manufacturing defects inside every component they produce.
WHAT IS RADIQONᵀᴹ?
RADIQONᵀᴹ is AetherScan’s AI-powered X-ray defect detection system. It uses real-time radiography with up to 450 kV of X-ray power to see inside parts up to 3 m long without cutting or damaging them. Optivity® AI software finds defects, measures them and rejects non-conforming parts automatically, giving quality teams, production engineers and NDT professionals instant results with no film.
Aluminium castings and die castings to welds, PCB assemblies, food and tyres, RADIQONᵀᴹ helps manufacturers catch hidden defects early and make faster quality decisions. Designed for industrial X-ray inspection, it is configured to customize your component size, material, geometry, inspection volume and production workflow.
AetherScan is the company behind RADIQONᵀᴹ, built to give manufacturers one dependable platform for seeing manufacturing defects inside every component they produce.
RADIQONᵀᴹ AI
RADIQON™ reveals what’s inside every component, detects hidden defects, and enables real-time automated inspection without film or production-line delays.
Step 1
Automatically grips and rotates each component according to its component configuration.
Step 2
X-ray detectors capture high-resolution digital view from multiple angles.
Step 3
Optivity® AI detects, defects and classifies them, decides Pass or Fail.
Step 4
Failed parts are rejected automatically and a report is generated.
A real RADIQONᵀᴹ report: one aluminium part, five sides, under three minutes. Every gas hole counted, sized and graded to ASTM E505.
Part
Not OK
Material
Aluminium
Standard
ASTM E505
Cycle Time
2 min 18 s
Sides Inspected
5
Defects Found
243 Gas holes
2 Shrinkage
Defect Area
3,274.81 mm²
Gas Holes
Shrinkage
Defect Area
mm²
ASTM
Gas holes and shrinkage per side. ASTM E505 category A and B, severity level 4 on every side.
Gas Holes
Shrinkage
Defect Area
mm²
ASTM
Gas holes and shrinkage per side. ASTM E505 category A and B, severity level 4 on every side.
Gas Holes
Shrinkage
Defect Area
mm²
ASTM
Gas holes and shrinkage per side. ASTM E505 category A and B, severity level 4 on every side.
Gas Holes
Shrinkage
Defect Area
mm²
ASTM
Gas holes and shrinkage per side. ASTM E505 category A and B, severity level 4 on every side.
Gas Holes
Shrinkage
Defect Area
mm²
ASTM
Gas holes and shrinkage per side. ASTM E505 category A and B, severity level 4 on every side.
KEY CAPABILITIES
Built for fast production lines running many product variants, with the consistency strict compliance demands.
No film development. Results appear as the part moves through.
Every part, not a sample. Nothing slips through to your customer.
Automatic gripping and rotation, with precise defect size measurement.
The higher your volume, the more it pays back.
Switch product variants in seconds. Fits into your production line.
Built‑in health checks and an easy, interactive interface.
APPLICATIONS & INDUSTRIES
CASTINGS
Detect porosity, voids, inclusions, cracks, shrinkage, and internal material inconsistencies.
AUTOMOTIVE COMPONENTS
Inspect critical automotive parts, castings, die-cast components, housings, and structural components.
AEROSPACE COMPONENTS
Inspect safety-critical aerospace components for hidden internal defects and discontinuities.
WELDING & FABRICATION
Evaluate weld integrity and identify internal weld discontinuities and defects.
PCB & ELECTRONICS
Inspect solder joints, internal connections, component placement, and hidden assembly defects.
TYRES
Identify internal voids, structural inconsistencies, belt alignment issues, and other internal conditions.
PLASTIC COMPONENTS
Identify internal voids, incomplete fills, air gaps, and other defects in molded components.
RUBBER COMPONENTS
Inspect internal separation, inclusions, bonding issues, and structural inconsistencies.
METAL COMPONENTS
Examine machined, formed, and manufactured metal components for internal material discontinuities.
INDUSTRIAL ASSEMBLIES
Verify assembly completeness, part placement, internal fit, and hidden assembly conditions.
CONTACT
Tell us about your component and inspection challenge.
Our team can help determine the appropriate RADIQONᵀᴹ configuration for your application.
CONSULTATION INCLUDES
Application review
Component and material assessment
Inspection requirement discussion
Configuration guidance
Imaging requirement discussion
Automation requirement discussion
Workflow evaluation
Production integration discussion
Technical support discussion
SYSTEM CONFIGURATION
Every inspection requirement is different.
Component size, material, geometry, defect type, production volume, imaging requirements, automation, and workflow all influence the right industrial X-ray inspection configuration.
RADIQONᵀᴹ can be configured around your specific inspection application.
CONFIGURATION CONSIDERATIONS
Component size
Component material
Component geometry
Detector configuration
Imaging requirements
Defect requirements
Inspection workflow
Production volume
Automation requirements
Production-line integration
Defect size
Defect classification
Industrial X-ray inspection systems are used for non-destructive inspection of castings, welds, automotive components, aerospace parts, PCB assemblies, electronics, batteries, tires, plastics, rubber components, metal parts, and industrial assemblies.
X-rays pass through the component and generate an image based on differences in material density and thickness. RADIQONᵀᴹ digital detectors capture the image, allowing internal structures and potential defects to be evaluated.
Consider component size, material, geometry, defect type, required resolution, inspection volume, automation requirements, reporting needs, production integration, and technical support.
RADIQONᵀᴹ can help reveal porosity, shrinkage, voids, inclusions, cracks, air gaps, and other internal material discontinuities.
Yes. RADIQONᵀᴹ is commonly used to examine aluminium castings and die-cast components for internal defects such as porosity, voids, inclusions, cracks, and shrinkage-related conditions.
When comparing X-ray inspection systems for electronics assembly, consider detector resolution, image quality, image processing, inspection speed, defect visibility, automation, reporting, integration, component compatibility, and technical support.
Manufacturers can evaluate industrial X-ray inspection suppliers, such as AetherScan, based on system capabilities, application suitability, configuration, installation, training, technical support, maintenance, and after-sales service.
No. RADIQONᵀᴹ is a non-destructive testing system that allows internal structures to be inspected without cutting, breaking, or damaging the component.
Yes. RADIQONᵀᴹ can be configured based on component size, material, geometry, imaging requirements, automation, inspection workflow, and application.
Share your component type, dimensions, material, defect requirements, inspection volume, automation requirements, and application with the AetherScan team. The inspection requirements can then be evaluated to determine an appropriate RADIQONᵀᴹ configuration.
Yes. RADIQONᵀᴹ can be configured for production-line inspection depending on the component, inspection workflow, automation requirements, and production environment.
We’ll send the sample report to the email address you provided. If you don’t see it in your inbox, check your spam or junk folder.
